Pony | Pipe Clamp Kit for ¾" Irrigation Pipe - The Original
Pony Pipe Clamp Kits make economical, strong and instant-acting bar clamps.
They are easy to mount on ¾" irrigation (25,4mm) o.d pipe with threaded ends.
All Pony Pipe Clamp fixtures include quality features such as steel thrust-bearings, special smoothly cut Acme threaded screws, malleable/ductile iron casting with baked enamel finish and the original "Multi-Disc-Clutch" design.
Please Note:
- The extra spring supplied in the kit is for replacement of the tailstock spring, should it wear out at any point
- You will require ¾" irrigation pipe for the Clamp Kit
- If you use a non taper USA Standard ¾" thread, the we suggest that you use Loctite on the headstock thread as well
- Using a proper USA Standard NPT (National Pipe Thread Taper) thread you will not require any Loctite as the thread is tapered and therefore self locking
Specifications
| Part No. | Jaw width | Spindle Diameter |
| #50 | 1 1/4" | 5/8" |
| 31,75mm | 15,8mm |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Pony | Pipe Clamp Kit for ¾" Irrigation Pipe - The Original
Pony | Pipe Clamp Kit for ¾" Irrigation Pipe - The Original
Pony Pipe Clamp Kits make economical, strong and instant-acting bar clamps.
They are easy to mount on ¾" irrigation (25,4mm) o.d pipe with threaded ends.
All Pony Pipe Clamp fixtures include quality features such as steel thrust-bearings, special smoothly cut Acme threaded screws, malleable/ductile iron casting with baked enamel finish and the original "Multi-Disc-Clutch" design.
Please Note:
- The extra spring supplied in the kit is for replacement of the tailstock spring, should it wear out at any point
- You will require ¾" irrigation pipe for the Clamp Kit
- If you use a non taper USA Standard ¾" thread, the we suggest that you use Loctite on the headstock thread as well
- Using a proper USA Standard NPT (National Pipe Thread Taper) thread you will not require any Loctite as the thread is tapered and therefore self locking
Specifications
| Part No. | Jaw width | Spindle Diameter |
| #50 | 1 1/4" | 5/8" |
| 31,75mm | 15,8mm |
Original: $28.40
-70%$28.40
$8.52Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Pony Pipe Clamp Kits make economical, strong and instant-acting bar clamps.
They are easy to mount on ¾" irrigation (25,4mm) o.d pipe with threaded ends.
All Pony Pipe Clamp fixtures include quality features such as steel thrust-bearings, special smoothly cut Acme threaded screws, malleable/ductile iron casting with baked enamel finish and the original "Multi-Disc-Clutch" design.
Please Note:
- The extra spring supplied in the kit is for replacement of the tailstock spring, should it wear out at any point
- You will require ¾" irrigation pipe for the Clamp Kit
- If you use a non taper USA Standard ¾" thread, the we suggest that you use Loctite on the headstock thread as well
- Using a proper USA Standard NPT (National Pipe Thread Taper) thread you will not require any Loctite as the thread is tapered and therefore self locking
Specifications
| Part No. | Jaw width | Spindle Diameter |
| #50 | 1 1/4" | 5/8" |
| 31,75mm | 15,8mm |
